Ask about a founding place

Pressure test vs moisture meter: what each one tells a repairer

A moisture meter measures water already in the walls. A pressure test shows where it gets in. How repairers use both on the same job.

They answer different questions. A moisture meter asks “is there water in this wall now?” A pressure test asks “where can water get in?” A good repairer often needs both answers. A pressure test can show where water can get in before it does damage, and that’s the test Airvaro is built for.

Pressure test vs moisture meter, side by side

Moisture meter Pressure test
What it measures Moisture in the material at the spot it touches Air escaping through gaps in the body
What it finds Moisture that needs investigation Entry points, wet or dry
Works on a dry van? Reads dry, even if a gap is there Yes. It needs no water
What you get Readings, spot by spot A list of leak points to reseal

How a moisture meter works

A pin meter passes a small current between two pins pushed into the surface. Wet material conducts better, so the reading climbs. A pinless meter reads through the surface without piercing it. Either way, it only sees the patch it’s held against, and only once water has arrived.

How a pressure test works

The technician prepares the van for the test, then raises the air pressure inside slightly. Soapy water on the outside seams and fittings makes bubbles where air escapes. Those spots give the technician somewhere to look for a possible water entry point.

Testing with Airvaro equipment uses soapy water for this step, not smoke.

Airvaro makes purpose-built pressure-testing equipment for this job. The technician uses the variable pressure control to suit each van. A moisture meter helps you map the wet area. Pressure testing helps you find gaps before visible water damage appears.

How repairers use them together

  1. Meter first, if there’s a sign. A stain, a soft floor or a musty smell tells the repairer to map how far moisture has spread.
  2. Pressure test to find the cause. The wet patch is often some distance from where the water came in, because water runs along frames before it shows.
  3. Reseal the entry points.
  4. Retest, and meter again later. The retest can confirm the seal holds. A later meter reading can confirm the area is drying.

Water can show up well away from where it entered. Use the moisture readings to record the affected area and the pressure test to look for gaps worth investigating.

Why the record matters

Insurers expect owners to keep up with maintenance. AAMI’s caravan PDS (A00114 15/12/20, p13) asks owners to “keep your caravan structurally sound, watertight, secure and well maintained (e.g. maintain seals, fix leaks, remove mould…)”. Source

A dated report of where the seals were tested and fixed is one way to show you did. That’s what a test with Airvaro equipment should leave behind: a dated report the owner can keep with their records. Check your own policy for what it asks.

A job that shows the difference

From the workshop jobs I oversaw as group operations manager, one sticks with me. A van came in with water in the robe, in the cabinets beside the bed and in the overhead cabinets. Like most owners, the customer knew they had a leak. They didn’t know where it was coming from.

The moisture meter confirmed what the customer could already see: the robe and cabinets were wet. That’s a useful record of the damage. It didn’t tell us where the water was getting in.

The pressure test did. With the van under pressure and soapy water on the roof fittings, bubbles came out of the seals around the roof junction box. That’s a gap water can use, well away from where the wet showed up inside. Chasing the wet patch inside the robe wouldn’t have found it.

The fix was simple. We removed the old seals, cleaned up the area and resealed it.

Photograph each finding, mark where it was and record the fix as you go. Give the owner a dated report they can refer back to.

Questions to settle in your workshop

The rule to remember

Meter to map the damage, pressure test to find the cause, retest to prove the fix, and give the owner a dated report. See how the Airvaro System works. Stop the rot.


Jason Potter is the founder of Airvaro. LinkedIn

Facts checked in October.