Ask about a founding place

Pre-delivery pressure testing: give buyers a complimentary seal report

Where a pressure test fits in a caravan pre-delivery inspection, what the handover report should show, and why a dated record helps the dealer as much as the buyer.

Short answer: a complimentary seal-test report gives your dealership a selling point to put in front of buyers while they’re choosing a new caravan. Include the pressure test and written result in your pre-delivery inspection (PDI), and promote that inclusion in your listings, brochures and sales conversations. The customer already expects a new van to keep water out. The report shows what your dealership checked before handing it over.

Sell the report before the buyer reaches handover

A buyer comparing caravans is also choosing a dealership. A complimentary seal-test report gives your sales team something specific to offer: a pressure test before delivery, any faults found addressed and retested, and the written results supplied at handover.

The proposition is simple: “Every new caravan comes with a complimentary seal-test report. Before handover, we pressure test your van, address any faults found and give you the written results.”

Put that promise in your caravan listings, on your website, in brochures and in the salesperson’s walkthrough. Show prospects an example of the report so they can see what they will receive. It gives them a concrete reason to choose your dealership over one offering only a verbal assurance. The opportunity is to earn more sales by making your pre-delivery checks visible.

Buyers are also learning more about their own responsibilities. Some caravan warranties and insurance policies make seal maintenance the owner’s responsibility, and as more owners read the fine print, I think they’ll look for a dealer with a workshop they can come back to, and one that can give them a dated record of their seals. Whether they’re buying new or used, telling them you pressure test could be the difference that wins the sale, and brings them back every year for seal maintenance.

Where it sits in the PDI

  1. Chassis, running gear and towing checks
  2. Gas and 240 V checks by the licensed trades
  3. Body, fittings, accessories and dealer-fit options installed
  4. Pressure test (van complete, prepared to the test procedure)
  5. Any seal found leaking is fixed and retested
  6. Interior clean, appliance and water checks
  7. Customer walkthrough, with the test report handed over

Why stage 4 and not earlier: dealer-fit accessories mean new holes. An awning, a solar panel, a TV bracket or a rear bar can all add penetrations. Testing before they’re fitted tests a different van to the one the customer drives away.

Why before the clean: if the test finds a joint that needs work, resealing is messy. Do it before the van is detailed.

What the handover report should show

A report only helps if someone can read it later and understand it without the technician in the room.

Field Why it matters
VIN, chassis number and build date Ties the record to one van
Test date and tester’s name Makes it a dated record, not a sticker
Method, equipment and test conditions So a later test can be compared like for like
Areas checked and any exclusions Records the scope, including areas that couldn’t be checked
Result: faults found, no faults found, or unresolved findings Makes the outcome explicit; include photos and any repairs
Retest result after any fix Records what the retest found under the stated conditions
Signature of the customer at walkthrough Shows they received it

Include it in the sale and deliver it at handover

Treat the test and report as part of the dealership’s pre-delivery cost, included in the caravan’s sale price. Asking a new-van buyer to pay extra to check whether it keeps water out is a hard sell. A complimentary report makes more sense as a reason to buy from you.

Make the written result part of every handover. A clear ‘No faults found’ result is just as important as a report documenting faults and repairs. State the areas checked and the conditions. If a finding remains unresolved, explain it and arrange the next step before presenting the job as complete.

Keep a copy against the van’s VIN and chassis number so your service team can find it later. The report’s layout can vary; the important part is that the buyer and dealership receive the same clear, dated result.

Have the technician record the checks and result during the job. Include photos, fault locations and any repairs so the buyer can see what was checked and what work was done.

That’s the job the Airvaro Passport app is being built for: record each finding with photos in the bay, then send the buyer a dated report. It’s coming soon.

One manufacturer already makes the case

Jayco, which the ACCC describes as Australia’s largest caravan manufacturer, runs a $395 factory pressure test (incl. GST, listed price in October 2026) at its Factory Service Centre in Dandenong South, with a report included. Its page tells owners to book one “before putting the RV into storage, before a big trip, as part of an annual service or if there are concerns around seal degradation.”

That is a separately priced owner service, rather than a pre-delivery inclusion. For a new van, your dealership can include the test and report in the sale and make it a complimentary buyer benefit. Handover starts the dated record; later maintenance checks can build on it.

What it won’t do

Who this isn’t for: a dealer whose manufacturer already supplies a dated factory test report for each van may not need to repeat it, unless dealer-fit options have added holes since.

A checklist for adding it

Questions to ask before you start

From the workshop jobs I oversaw as group operations manager, a pressure test was rarely raised or discussed at handover. Make it part of the sales conversation much earlier. Give prospects a reason to choose your dealership, then give them the written result when they collect their van.

The rule

Make the complimentary seal report part of the sale. Test the van the customer actually takes home, and deliver the written result at handover. See how the Airvaro System works.


Jason Potter is the founder of Airvaro. LinkedIn